There should be no reason to set Debug to anything other than zero unless you are instructed to do so byĬurrent default value is 55. This should decrease VCDS's susceptibility to interference by things like virus scanners (except A zero in this field (the default) means NO debug output will be Contact us for advice ifĬontrols how much debugging information VCDS records. Value from the default unless you are having difficultiesĬommunicating with a particular controller. The default unless you are having difficulties communicating withĪ particular controller.
Used during the initialization of a session between the PC and theĬar. KW2 Delay has to do with the amount of time With our current Interfaces, this field is unavailable. This means VCDS will determine the correct That VCDS will try when connecting to a controller. Which is used for updating the firmware in the interface, registration, WiFi configuration and other functions. On the HEX-NET or HEX-V2 the button is used to launch the VCDS Interface Config utility Testing a port's outputs for troubleshooting certain The LED on the Interface to blink and may be useful for Legacy Dongle Interfaces, t he button causes Then you should test the port in the car using Of the results show 'Short to Ground' or 'Short to +12V'
